英语翻译These are the general cause for this error message:Misconfiguration of the interfaces or switch ports or cabling problem.Mismatch of primary condary IP addresses on the neighbor interface.A switch/hub is leaking multicast packets to other

英语翻译These are the general cause for this error message:Misconfiguration of the interfaces or switch ports or cabling problem.Mismatch of primary condary IP addresses on the neighbor interface.A switch/hub is leaking multicast packets to other
英语翻译
These are the general cause for this error message:
Misconfiguration of the interfaces or switch ports or cabling problem.
Mismatch of primary condary IP addresses on the neighbor interface.
A switch/hub is leaking multicast packets to other ports.
If using a LAN switch,the vlans may have joined routers together.
Another router uses EIGRP advertising on the same subnet lan as this router and is misconfigured with an incorrect AS number.
In order to troubleshoot this issue,check these items:
Verify that the cable is connected correctly.
Double-check the interface configuration for misconfigured IP addresses on the local and neighboring routers.
Verify that the primary address of the interface is in the same subnet as the primary address of the neighbor router.
If the EIGRP neighbor connection is joined via a LAN hub,use separate hubs in order to break up the broadcast domain for each logical LAN segment,or configure no eigrp log-neighbor-warnings to eliminate the errors.
If there is a switch involved,check the switch configuration to make sure different LAN segments are not configured to be in the same VLAN that share the same broadcast domain.

英语翻译These are the general cause for this error message:Misconfiguration of the interfaces or switch ports or cabling problem.Mismatch of primary condary IP addresses on the neighbor interface.A switch/hub is leaking multicast packets to other
看楼上的翻译我汗流不已,用的是翻译软件吧?
我来说两句
错误的主要原因如下:
交换机接口配置错误或者电缆有问题.
接口IP设置错误.
一个开关(HUB)在其他PORTS上有数据泄露.
如果有用LAN卡,可能与其他数据包混在一起.
另一个同一个局域网内使用EIGRP广告的路由器出现AS号码错误,
要解决问题,下面给一些参考意件,
确认电线连接正确.
复查路由器端口配置的IP地址.
确认所连接的路由器是主路由器.
如果EIGRP是上面所说的那样请使用单独的HUB来分割逻辑区段,或不配置LOG-NEIGHBOR-WARNING来消除警报(此处是步骤,就不翻译过来了).
如果有开关的话,请确认开关的配置,确保不同网络部分未配置为在同一个虚拟局域网共享同一广播域.